Mesin Cutting Sticker Roland CAMM Servo Series

Mesin cutting sticker Roland CAMM Servo Series, terdapat beberapa ukuran yang lebih besar dari GX-24. Mesin cutting sticker Roland CAMM Series terbagi menjadi ukuran 73 cm, 1 m (not available), 1,19 m, 1,5 m.

Spesifikasinya:

MODEL	GX-640	GX-500	GX-400	GX-300
Mechanism/ Driving method	Friction feed/Digital control servo motor
Maximum cutting area	Width: 1575 mm (62 in.) Extend: 1626 mm (64 in.) Length: 24998 mm (984-1/8 in.)	Width: 1195 mm (47 in.) Length: 24998 mm (984-1/8 in.)	Width: 1000 mm (39 in.) Length: 24998 mm (984-1/8 in.)	Width: 737 mm (29 in.) Length: 24998 mm (984-1/8 in.)
Acceptable media widths	Min. 130 mm (5-1/16 in.) Max. 1842 mm (72-1/2 in.)	Min. 90 mm (3-1/2 in.) Max. 1372 mm (54 in.)	Min. 90 mm (3-1/2 in.) Max. 1178 mm (46 in.)	Min. 50 mm (2 in.) /Max. 915 mm (36 in.) (50 to 540 mm (2 in. to 21 in.), 582 to 915 mm (23 in. to 36 in.))
Width of material that can be cut off	0 to 1778 mm (0 in. to 70 in.)	0 to 1270 mm (0 in. to 50 in.)	0 to 1067 mm (0 in. to 42 in.)	0 to 812 mm (0 in. to 32 in.)
Tools	Special blade for CAMM-1 series
Maximum cutting speed	During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction)
Cutting speed/Brade force	10 to 850 mm/sec. (in increments of 10 mm/sec.)/20 to 350 gf
Mechanical resolution	0.0035 mm/step (0.000137 in./step)	0.0125 mm/step (0.000492 in./step)
Software resolution	0.025 mm/step (0.000984 in./step)
Distance accuracy*¹	Error of less than 0.2% of distance traveled, or 0.1 mm (0.00394 in.), which is greater
Repetition accuracy¹²*³	0.1 mm or less
Interface	Serial (RS-232C-compatible), USB (Rev 1.1)
Replot memory	2 MB (buffer size: 8 MB)
Power supply/Power consumption	AC 100V to 240V ±10% 50/60Hz 1.2A/Approx. 100W			AC 100V to 240V ±10% 50/60Hz 1.1A/Approx. 95W
Dimensions with stand	2155 (W) x 727 (D) x 1113 (H) mm (83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in.)	1602 (W) x 727 (D) x 1113 (H) mm 63-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)	1407 (W) x 727 (D) x 1113 (H) mm (55-3/8 (W) x 28-5/8 (D) x 43-13/16 (H) in.)	1144 (W) x 727 (D) x 1113 (H) mm (45-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)
Weight with stand	64 kg (141.1 lb)	55 kg (121.2 lb)	51 kg (112.4 lb)	44 kg (97 lb)
Operating temperature	5 to 40°C (41 to 104°F)
Operating humidity	35% to 80% (non-condensing)
Included items	Power cord, blade holder (XD-CH2), pin, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user's manual